Q-Tops (Fitted Table Toppers)
What are Q-Tops?
Q-Tops are SMT Expo's patented, staple-free fitted PVC table toppers for trade show and convention tables. They stretch over a standard show table and grip the edges without any staples, clips, or tools — protected under US Patent #7,178,470.
How do Q-Tops stay on the table without staples?
Q-Tops are made from a fitted PVC vinyl that stretches to hug the table tightly on all sides. Heat-sealed corners create a monolithic fitted cover that holds taut under tension, so it grips the table edge and stays in place without staples, clips, or tape.
What sizes do Q-Tops come in?
Q-Tops are available in six sizes to fit standard 4', 6', and 8' trade show tables, each in 24" and 30" heights.
How many Q-Tops come in a case?
Case quantities range from 60 to 100 per case depending on size — 100/case for 4' tables, 80/case for 6' tables, and 60/case for 8' tables, across both 24" and 30" heights.
Are Q-Tops flame retardant?
Yes. Q-Tops are made from flame retardant PVC film that meets venue fire code requirements that generic plastic table covers often fail to meet.
Is the Q-Top table topper actually patented?
Yes — Q-Tops are the only patented fitted PVC table topper on the market, protected under US Patent #7,178,470.
Can Q-Tops be cut to a custom size on-site?
Q-Tops ship pre-cut to exact table dimensions, so there's no on-site cutting, no wasted material, and exact piece counts for every show.
D-Skirts (Adhesive Table Skirting)
What are D-Skirts?
D-Skirts are SMT Expo's adhesive pleated table skirting, designed to attach to Q-Tops or any existing table topper without staples, clips, or velcro.
How do D-Skirts attach to a table?
D-Skirts use a reinforced polymer band with double-sided adhesive tape. Peel the protective strip and press into place — done in seconds, with no damage to the table surface.
Do D-Skirts only work with Q-Tops?
No. D-Skirts are fully compatible with any table topper you already use — they don't require Q-Tops specifically, though the two are designed to work together as a complete system.
What drop lengths are D-Skirts available in?
D-Skirts are available in two drop lengths: 30" and 40", both shipping 72 per case.
What colors do D-Skirts come in?
D-Skirts are available in Blue, Black, White, Forest Green, and Grey, with custom color matching available on request.
Will D-Skirts damage my rental tables?
No — the adhesive attachment method leaves no staple holes, clip marks, or residue damage, unlike traditional stapled skirting.
D-Pail (Disposable Waste Pails)
What is a D-Pail?
The D-Pail is SMT Expo's disposable, flat-folded waste pail for trade show booths and convention setups. It ships flat and pops into shape in about 2 seconds.
How do you assemble a D-Pail?
Push the bottom of the flat-folded pail to pop it into shape — takes about 2 seconds. A PE liner comes pre-installed, with two extra liner bags included for quick swaps.
Is the D-Pail recyclable?
Yes, the D-Pail is 100% recyclable.
How many D-Pails come in a case?
D-Pails ship 60 per case, flat-folded to save storage space compared to traditional bulky trash cans.
Why use a D-Pail instead of a regular trash can at a trade show?
D-Pails eliminate the need to store, transport, and set up bulky rigid trash cans — they ship flat, assemble in seconds, and are disposable, making them ideal for general service contractors managing waste across dozens of shows per year.
Staple-Free System & Safety
Why should I switch to staple-free table coverings?
Stapling table covers is one of the most common causes of hand injuries during trade show setup. Staples also damage table surfaces and leave a messy result. SMT Expo's staple-free system installs in seconds without tools — a cleaner result, a safer crew, and faster setup every time.
How much time does a staple-free table cover actually save on setup?
SMT Expo's system is designed for roughly 10 seconds of setup time per table, since there's no cutting, stapling, or tool use required — compared to the cutting, measuring, and stapling process required by traditional roll vinyl table covers.
Do staple gun injuries really happen that often at trade shows?
Yes — protruding staples from traditional table cover installation are a well-documented hazard, injuring setup crews, equipment handlers, exhibitors, and even attendees, and they're a recurring driver of workers' comp claims across the event industry.
What happens to tables after years of stapled table covers?
Repeated stapling permanently damages table wood over time, reduces table lifespan, and requires labor hours to remove leftover staples after every show — problems the SMT Expo staple-free system eliminates entirely.
Company & Brand
What is SMT Expo?
SMT Expo is the SMT Solutions product line — Q-Tops, D-Skirts, and D-Pail — a division of Glenmore Industries based in Edison, NJ, supplying staple-free trade show table products to exhibitors and general service contractors across North America.
What does "SMT" stand for at SMT Expo?
SMT stands for Smart Modular Technology, referring to SMT Expo's modular, staple-free table cover and skirting system.
Is SMT Expo the same as SMT Solutions?
Yes — SMT Solutions is the product line name for SMT Expo's three core products: Q-Tops, D-Skirts, and D-Pail.
Who owns SMT Expo?
SMT Expo is a division of Glenmore Industries.
When was SMT Expo founded?
SMT Expo was founded in 2015 to eliminate staple gun injuries at trade shows.
Where is SMT Expo located?
SMT Expo's East warehouse is located at 115 Newfield Ave, Suite E, Edison, NJ 08837, with a second warehouse location in Cummins, GA serving the West.
Ordering, Shipping & GSC Info
Does SMT Expo ship to Canada and Mexico, or just the USA?
SMT Expo ships across the USA, Canada, and Mexico from its East (Edison, NJ) and West (Cummins, GA) warehouses.
Is there a minimum order quantity?
No minimum order — SMT Expo works with everything from a single case up to full pallet orders, though typical orders run around 30 cases of Q-Tops, 12 of D-Skirts, and 12 of D-Pails.
How long does it take to get a quote or place an order?
SMT Expo's team responds to order and quote requests within 2-3 business days.
Does SMT Expo work with general service contractors (GSCs) and show decorators?
Yes — SMT Expo's core customers are general service contractors and trade show decorators managing dozens of shows per year, alongside individual exhibitors.
Can I get SMT Expo products in time for a show with a tight deadline?
Reach out and mention your show deadline — SMT Expo will do everything possible to accommodate tight turnarounds.
Does SMT Expo offer quarterly reordering for regular customers?
Yes — quarterly reorders are common and welcomed; SMT Expo works with the trade show calendar the same way its GSC and decorator customers do.
How are SMT Expo products packaged for shipping?
Products ship flat-packed by case, keeping storage and freight footprint low compared to bulkier traditional table cover rolls or rigid trash cans.
Comparisons
What's the difference between Q-Tops and a traditional stapled table cover?
Traditional table covers use vinyl rolls that must be manually cut and stapled on-site — heavy, wasteful, and prone to causing staple injuries. Q-Tops ship pre-cut to exact table dimensions and install in seconds with no tools, no cutting, and no staples.
Are D-Skirts better than clipped table skirting?
D-Skirts use an adhesive attachment instead of clips, which means no clip fumbling, no clips falling off mid-show, and no risk of clip damage to table edges — while installing just as fast or faster.